Connectivity
Failures
Poor network infrastructure doesn't just affect internet speed — it limits every smart building system you want to run on top of it.
Dead Zones in Critical Areas
Wi-Fi dropping in basements, plant rooms, and stairwells. BMS sensors losing connectivity. Guests and staff frustrated by unreliable coverage.
Professional RF predictive survey and Wi-Fi 6E deployment to eliminate dead zones with certified coverage
Flat Network Architecture
BMS, IP cameras, guest Wi-Fi, and corporate IT on the same VLAN. A single compromised device can reach every other system on the network.
OT/IT network segmentation with VLAN design, firewall policy, and documented IP address plan
Outdated Cabling
Cat5e cabling unable to meet PoE++ demand from IP cameras, Wi-Fi 6E APs, and smart sensors. Bandwidth bottlenecks on ageing backbone.
Cat6A structured cabling with OM4 fibre backbone, certified to TIA-568 and ISO 11801 standards
Poor Indoor Cellular
No indoor 4G/5G signal. Guests and staff forced onto Wi-Fi calling only. Lifts and basements with zero cellular — a safety issue as much as a service issue.
Carrier-agnostic Distributed Antenna System (DAS) for 4G/5G in-building cellular coverage
What We
Deliver
Network infrastructure designed before it's installed — topology documents, IP plans, and coverage simulations agreed before civil works begin.
Network Design & Architecture
Network topology design produced before any hardware is specified. OT/IT/IoT/Guest VLAN separation strategy documented with firewall zone policy, switch architecture, and IP address plan. Pre-installation design review ensures civil works align with network requirements and avoids costly rework.
Structured Cabling (Cat6A / Fibre)
Full structured cabling installation to TIA-568 and ISO 11801 standards. Cat6A horizontal runs with shielded STP cabling where EMI environments demand it. OM4 multimode fibre backbone for high-bandwidth inter-floor connections. 19" patch panel terminations and full link certification testing — every run documented with test report.
Enterprise Wi-Fi 6E Deployment
RF predictive survey using floor plan heat mapping — coverage designed on paper before any AP is mounted. Aruba, Cisco Meraki, or Ubiquiti UniFi access point deployment. SSID design with band steering across 2.4/5/6GHz. QoS policy for prioritising voice, video conferencing, and BMS traffic. Post-installation coverage validation walk-test with documented RSSI and throughput results.
OT/IT Network Segmentation
Dedicated network segments for BMS, physical security, AV, IoT, and guest-facing devices. Physical separation where required by security policy. VLAN trunk configuration on managed switches with port security. Unidirectional gateway installation where OT-to-IT data transfer is required without reverse path exposure. Compliance documentation for cyber insurance assessments.
Cellular DAS & In-Building Coverage
Distributed Antenna System design and installation for 4G/5G in-building cellular coverage. Carrier-agnostic passive DAS serving multiple network operators simultaneously from a single antenna infrastructure. Coverage design for hotels, commercial buildings, multi-floor offices, and basement car parks. Signal level commissioning and hand-over documentation.
See these systems deployed.
Browse outcomes from our completed connectivity and infrastructure engagements.
Infrastructure that
never becomes the problem.
Every smart building system — BMS, security, AV, IoT sensors — depends on the network beneath it. We design and certify the foundation so your other systems can perform as specified.
Discuss Your NetworkDesign Before Civil Works
Network topology and IP plan agreed before conduits are installed — avoids route conflicts and cable over-runs.
Every Run Certified
TIA-568 certification testing on every cabling link with documented test results — not just a visual inspection pass.
OT Security Built In
Building systems segmented from corporate IT from day one — not patched in after a security incident.
Related Services
Connectivity infrastructure underpins AV, security, and building intelligence systems
Audio-Visual Systems
Dante AV-over-IP and 4K video distribution run over the structured cabling and network switches we design.
Physical Security
IP CCTV and access control network design aligned with OT/IT segmentation policy from day one.
BMS Upgrades
BACnet IP and cloud platform connectivity for Priva, Tridium Niagara, and EcoStruxure depends on the OT network we design.
The foundation that
everything runs on.
Let's design the network infrastructure your smart building needs — certified cabling, segmented networks, blanket Wi-Fi coverage, and in-building cellular. Done properly, once.