The Remote Lab
Where complex integrations are mastered off-site.
The Downtime Cost of Traditional Integration
Traditional building automation deployments are messy, disruptive, and expensive. A contractor arrives with boxes of equipment, installs over 2–3 weeks, and debugs a live system while tenants complain and alarms flood the BMS.
When they finally leave — usually behind schedule and over budget — you're left with a system that's "substantially complete" but not fully optimised.
There's a better way.
The Staggering Cost (50k sqm Building)
Disrupted
Complaints
Overtime Hrs
Waste
Stability
Full-Scale System Replication, Off-Site
Our Remote Lab in Dubai is a 100 sqm facility purpose-built for pre-staging complex building automation integrations. Think of it as a full-scale rehearsal space for your building's new brain.
Replicate Your Network
We recreate your building's exact control network in our lab using actual equipment (when possible) or equivalent models.
- > BACnet / Modbus / KNX
- > Exact IP Addressing
- > JACE / Edge Configs
Install & Configure
We install all proposed new equipment, cabling, software, and graphics. Everything is configured exactly as it will be deployed on-site.
- > Controllers & Gateways
- > Point Lists & Alarm Routing
- > VPN Connectivity
Comprehensive Testing
The real work. We systematically test every integration point, sequence, and failure scenario.
- > Protocol Translation
- > Sequence Validation (All Modes)
- > Network Load Testing
- > Cybersecurity Checks
Operator Training
Your operators train on the working system in our lab. They learn interfaces and simulate emergencies without risking live operations.
- > Risk-Free Environment
- > Expert Readiness Before Day 1
Client Acceptance Testing
Before we pack up, you visit the lab to witness the entire system operating flawlessly. You see every sequence, command, and alarm working.
From Lab to Live
in
72 Hours
Because 95% of the work is done in the lab, on-site deployment becomes a simple hardware installation exercise—not a complex commissioning project.
Physical Installation (8 Hrs)
Install controllers, final cabling, network connectivity check.
Cutover & Commissioning (8 Hrs)
Transfer control, functional tests (ASHRAE Guideline 36), sequence validation.
Optimization & Handover (8 Hrs)
Fine-tuning, sensor calibration, documentation, final operator refresher.
Why This Changes Everything
Zero-Downtime Integration
No trial-and-error chaos. Your building never experiences partial operation, flooded alarms, or HVAC instability.
Faster Project Delivery
72 hours vs 2–3 weeks. Faster ROI realisation, less tenant disruption, and lower soft costs.
Higher Quality Outcomes
Lab commissioning allows us to stress-test networks and refine sequences without deadline pressure.
Better Operator Preparedness
Operators trained in a controlled lab environment retain more and become competent faster.
Reduced Project Risk
Client acceptance testing in the lab eliminates deployment surprises. You've already seen it work.
Global Scalability
We can pre-stage integrations for projects anywhere in the world. One lab, unlimited reach.
What We Can Replicate
BMS & Protocols
- Tridium Niagara (N4, AX)
- Phoenix Contact PLC
- BACnet (IP, MS/TP)
- Modbus, KNX, LON
- MQTT & OPC UA
HVAC Systems
- Chiller Plants
- Air Handling Units
- Boiler Plants
- Pumping Systems
- Cooling Towers
- VRF Systems
Specialty Systems
- Access Control (Lenel, HID)
- Video Surveillance
- Lighting (DALI, Lutron)
- Metering (Energy, Water)
- Fire Alarm Integration
IoT & Analytics
- LoRaWAN & Zigbee
- Edge Computing
- Cloud Analytics (AWS/Azure)
- AFDD Diagnostics
- CMMS Integration
See Zero-Risk Deployment
In the Real World
Every Remote Lab validation translates into a smooth, low-disruption site deployment. Browse our completed projects to see how lab-validated configurations were delivered on-site in days — not weeks — with zero guest complaints, zero return visits, and zero surprises.
View Our ProjectsExperience Zero-Downtime Integration
Let us replicate your building systems in our Remote Lab and prove the integration works before we ever arrive on-site.